Installation

The following constraints apply to the configuration of system components:

A. The top of the Wall Box must be placed lower than the bottom of the head shower.

B. The Wall Box must be positioned a minimum of 160 mm above the finished floor level.

C. The piping between the Orbital Shower Core and the drain unit has to be built with a consistent slope towards the drain unit and a maximum distance of 3000 mm.

D. The maximum thickness of wall tiles and tile adhesive cannot exceed 15 mm (wall tile max.10 mm, tile adhesive max. 5 mm).*

* Note that the weight of the door is 4 kg, which gives an approximate weight of 8 kg using 5 mm tiles and 11 kg using 10 mm tiles.