Skip to main content

Installation

Install drainage pipe
210304_Remote_Cabinet_skvaller_comp_overview.eps

1

Perform the installation in accordance with current Industry Rules Säker Vatten Installation. See bulleted list 1 in chapter Important installation steps.

  1. Secure the drain pipe bend with screws. To ensure proper drainage, position the bend so the drain pipe slopes continuously downward from the wall box to the bend.

    240311-Remote_Install_Drainage_Bend.eps

  2. Connect the drainage pipe bend to the pipe. The pipe should bottom in the drainage pipe bend, approximately 20 mm deep.

    240311-Remote_Install_Pipe_to_Drainage_Bend.eps

  3. Draw the pipe to the position where the Wall box will be installed.

    240711_Hatch_Tiled_Drainage_Pipe_to_Wall_Box_Place.eps