Tiling
 |
The tile thickness on the wall and floor can be a maximum of 10 mm.
Install the tiling frame set.
Tile the wall and floor, and cut holes in the tiles with a drill max of 30 mm.
Caution
Do not cut the PEX Hoses, they need to stick out for coming installation steps.
Do not use a drill larger than 30 mm in diameter for the tiles; otherwise, the diverter will not fully cover the holes.
Make sure the tiles do not overlap the grating, allowing it to be removed.
Note
The floor tiles must be level with or higher than the frame. To achieve this, they must be at least 8 mm thick.
Apply silicone sealant around the floor drain and in the rest of the bathroom.
Fixture Installation completed. The next step is to install the Orbital Shower Core, Control Dial, shower head, and hand shower (including the diverter and hand shower holder). See the Technology Installation Manual for details.
|
