Orbital Shower Installation Options
Orbital Hatch Tiled can be installed inside or outside of the shower area, in a room with a waterproof floor. The distance between the center of the Orbital Shower Core and the center of the drain unit can be a maximum of 3000 mm.
Any bends in the sleeves and conduits going to and from the Orbital Shower Core must be achieved using 45° angles. For example, to achieve a 90° bend, two 45° bends need to be used. When installing the Orbital Shower, no more than six 45° bends (a maximum of three 90° bends) can be used in total. These limitations apply to both horizontal and vertical bends.
Note
When installing the Core in the shower area:
The distance from the top of the door to the bottom of the diverter must be a minimum of 140 mm, to make sure the door can be tilted open.
We recommend placing the diverter to the right of the hand shower holder to ensure sufficient space for connections to the Core.
