Skip to main content

Installation

Tiling
210419_R2_prepare_tiling_frame_comp_overview.eps
  1. Install the tiling frame set.

    210503_Standard_prepare_tiling_frame_direction.eps
  2. Cut holes in the tiles for water connections, and apply the tiles to the wall.

    Caution

    • Do not cut the PEX Hoses, they need to stick out for coming installation steps.

    • Do not use a drill larger than 30 mm in diameter for the tiles; otherwise, the diverter will not fully cover the holes.

    201201_Standard_tiling_head_hand_millimeter.eps
  3. Make sure the tiles do not overlap the grating, allowing it to be removed.

    Note

    The floor tiles must be level with or higher than the frame. To achieve this, they must be at least 8 mm thick.

    201130_R3_tiling_overlap.eps
  4. Apply silicone sealant around the floor drain and in the rest of the bathroom.

    240311_R3_tiling_grouting.eps