Skip to main content

Installation

Install the sensor cable, flush hose and recirculation hose
210630_Remote_Wall-integrated_Install_shower_Unit_hoses_with_black_cover_and_barb.eps
  1. 230427_Panel_Tiling_Frame_Set_Remove_Protective_Cover.eps
    230427_Shower_unit_Panel_inst_drain_hoses_and_cables.eps
  2. Install the sensor cable. It's important that the sensor cable goes first.

    Notice

    It is recommended to use fish tape to route the cables through the pipes.

    210121_Remote_Cabinet_Wall_mount_inst_drain_hoses_and_cables_2.eps
  3. Install the flush hose and recirculation hose.

    210121_Remote_Cabinet_Wall_mount_inst_drain_hoses_and_cables_3.eps
  4. Pull the sensor cable to where 20 cm of slack is visible.

    201104_Shower_Unit_inst_sensor_cable_black_cap_added_sensor_cable.eps