Mount the faucet
The faucet is delivered right oriented. To make it left oriented you can rotate the Control Dial bracket by loosening the screw in the back. Tighten the screw again when the bracket is set in the correct position. | |
|
Mount the Control Dial on the bracket. Position the Control Dial according to the “up marking” before assembly.
Fit the cable in the channel on the bottom of the base plate.
Mount the faucet to the base plate.
Caution
Make sure the o-ring in the bottom of the faucet is in place.
Remove the plastic cover from the adhesive strip at the bottom of the base plate.
Place the gasket between the faucet and the wash basin, before threading the faucet and cable through the opening.
Center the faucet on the sink and secure it with the adhesive.
Mount the faucet. Use a tubular socket wrench for better access.
