Skip to main content

Installation

Tiling
210419_R2_prepare_tiling_frame_comp_overview.eps

  1. Install the tiling frame set.

    210503_Standard_prepare_tiling_frame_direction.eps

  2. Install a tile trim around the Wall Box. Align it edge-to-edge with the inner side of the Wall Box.

    240710-Hatch_tile_trim.eps

  3. Tile the wall and floor, and cut holes in the tiles with a drill max of 30 mm.

    Caution

    • Do not cut the PEX Hoses, they need to stick out for coming installation steps.

    • Do not use a drill larger than 30 mm in diameter for the tiles; otherwise, the diverter will not fully cover the holes.

    240710-Hatch_Tiled_Tile_walls.eps

  4. Make sure the tiles do not overlap the grating, allowing it to be removed.

    Note

    The floor tiles must be level with or higher than the frame. To achieve this, they must be at least 8 mm thick.

    201130_R3_tiling_overlap.eps

  5. Mount a tile trim on the door.

    Note

    The space between the tile trim on the door and the tile trim on the wall needs to be slightly larger along the bottom edge, to make sure the door can be tilted.

    240710-Hatch_door_tile_trim.eps

  6. Apply tiles to the door. Use tile adhesive intended for steel. Ensure the depth of the tiles is level with the surrounding wall tiles.

    240710-Hatch_Tiled_Tile_Hatch.eps

  7. Apply silicone sealant around the floor drain and in the rest of the bathroom.

    240710-Hatch_Tiled_Tile_Grouting.eps

Fixture Installation completed.

The next step is to install the Orbital Shower Core, Control Dial, shower head, and hand shower (including the diverter and hand shower holder). See the Technology Installation Manual for details.

240710_Hatch_Tiled_Fixture_completed.eps