Skip to main content

Installation

Installing the black or white shower head

For the metallic shower head, see Installing the metallic shower head.

Figure 131. Component Overview
Component Overview


  1. Threaded adapter

  2. Shower head arm with gasket

  3. Shower head

  1. Cut the Wallbox UNI Push so that it protrudes 6-9 mm. We recommend using the LK Wallbox Cutter UNI.

    201201_Remote_shower_head_inst_1.eps

  2. Fit the threaded adapter into the UNI Push wallbox.

    Notice

    Cover the end of the threaded adapter with thread sealant to avoid leakage.

    201201_Remote_shower_head_inst_molded.eps

  3. Install the shower arm.

    240229_Remote_shower_head_inst_arm.eps

  4. Fit the shower head onto the shower head arm.

    Caution

    Make sure the gasket is in place, not to cross thread, and not to overtighten.

    191213_head_shower_install_3.eps