Skip to main content

Installation

Connect all components

  1. Attach the AC/DC power adapter in an available space using two screws.

    231108-mount_power_adapter.eps

  2. Connect the power adapter to the Tank.

    231108-electrical_connect_tank_to_power_adapter.eps

  3. Connect the Tank to the Pump.

    231108-electrical_connect_tank_to_pump.eps

  4. Mount the cable organizer in a suitable place in the commode and attach the cables.

    240116-Tank_Cable_organizer.eps

  5. Connect the power adapter to the socket.

    When the system is connected to power, the Tank will fill up about 4 dl of water, to make sure there is water to flush with even if the faucet has not been used.

    231108-electrical_power_to_outlet.eps

  6. Flush the toilet twice to ensure the Pump starts and the toilet cistern is refilled. To prevent any leakage, it is recommended to verify the water tightness.