Orbital Shower Installation Requirements
Core Wall Mounting: W 450mm, H 750mm, D 150mm
 |
The following constraints apply to the configuration of system components:
A. The top of the Orbital Shower Core must be placed lower than the bottom of the head shower.
B. The Orbital Shower Core must be positioned a minimum of 100 mm above the finished floor level.
C. The piping between the Orbital Shower Core and the drain unit has to be built with a consistent slope towards the drain unit and a maximum distance of 3000 mm.
D. The maximum thickness of wall tiles and tile adhesive cannot exceed 15 mm (wall tile max.10 mm, tile adhesive max. 5 mm).