Skip to main content

Installation

Prepare for hand shower and diverter
2104191521_diverter_bracket_comp_overview.eps

If installing Orbital Shower without the hand shower or with third-party components, please note that the following steps need to be adapted to the chosen installation scenario. When using third-party components, make sure to fulfill Orbital's requirements and follow the supplier's instructions.

  1. Drill holes in the stud between the diverter and the Wall Box.

    240212_Drill_holes_for_pipes.eps

  2. Install the PEX pipes in the conduit elbows. The PEX pipes should protrude a minimum of 100 mm.

    210430_diverter_bracket_assembly_1.eps

  3. Install the conduit elbows into the wall fixture.

    Caution

    • The Core shall be connected to the top inlet.

    • The shower head shall be connected to the bottom inlet.

    210421_diverter_bracket_assembly_2.eps

  4. Mount the wall fixture to the stud.

    201120_diverter_bracket_distance_block_millimeter.eps

    x3

    Countersunk stainless steel screw

  5. Pass the PEX pipes through the stud.

    240219-Hoses_to_holes_in_stud.eps