Skip to main content

Installation

Install drain
Figure 58. Drain unit and outlet unit
Drain unit and outlet unit


Caution

  • Plumbing and electrical installation should be performed according to industry rules.

  • Do not remove the protective cover until the frame is being installed in a later step.

  1. Insert the outlet unit, and then fold the protective film back to cover the drain unit.

    240213-Insert_Outlet_unit.eps
  2. 201209_install_drain_level_millimeter.eps

  3. Use all supplied screws to fasten the drain unit.

    201123_preinstallation_mount_drain.eps

    x7

    Countersunk stainless steel screw

  4. Connect the drain unit to the sewerage system as defined by industry rules.

    201209_install_drain_connect_drain.eps
Figure 59. Drain piping
Drain piping


. Provided by Customer:

  • Anchors

2

Perform the installation in accordance with current Industry Rules Säker Vatten Installation. See bulleted list 2 in chapter Important installation steps.

  1. Note

    Apply Glidex lubricant when assembling.

    2104291618_Remote_preinstallation_drain_pipes.eps

  2. Caution

    Make sure to fasten and anchor the pipes and fittings so they cannot move or be separated.

    210301_Remote_Cabinet_wall_mount_prepare_shower_area_drain_piping.eps

  3. Check water tightness to eliminate leakage.

    Caution

    For installations in Sweden leakage test shall be performed. The drain must be sample flushed and inspected visually to ensure that the assembly is tight. The leakage test shall be documented.

    240327-Cabinet-Drain_Pipes-Leakage.eps