Skip to main content

Installation

Install drainage pipe
210304_Remote_Cabinet_skvaller_comp_overview.eps

1

Perform the installation according to Swedish Säker Vatten industry rules. See bulleted list  1 in chapter Important installation steps

  1. Fixate the drainage pipe bend with screws in a suitable place.

    240311-Remote_Install_Drainage_Bend.eps

  2. Connect the sleeve to the cabinet's drainage socket.

    240311-Remote_Connect_Drainage_Sleeve_to_wall_box.eps

  3. Connect a pipe to the sleeve. Make sure that the empty tube is placed with a fall towards the outlet and that the pipe is clamped according to industry rules.

    240311-Remote_Connect_Pipe_to_Drainage_Sleeve.eps

  4. Connect the drainage pipe bend to the pipe. The pipe should bottom in the drainage pipe bend, approximately 20 mm deep.

    240311-Remote_Install_Pipe_to_Drainage_Bend.eps