Skip to main content

Installation

Install Wall Box
210304_Remote_Cabinet_install_comp_overview.eps

  1. Punch out one hole in the sheet metal on one of the sides of the Wall Box, depending on the installation scenario.

    210701_Remote_Cabinet_wall-integrated_inlet_holes_overview.eps
    Figure 36. Only valid for Orbital Audio

    Punch out holes in the perforated plate for the exciter cable and antenna.

    Only valid for Orbital Audio


  2. Cover the unused holes in the back of the Wall Box with plastic lids.

    210701_Remote_Cabinet_wall-integrated_inlet_holes_cover.eps

  3. Attach the pipe grommets.

    240220_Hatch_attach_cones.eps

  4. Note

    The weight of the Core is approx. 25 kg. The wall construction must be able to support this load.

    211102_Hatch_install_millimeter.eps

  5. Mount the Wall Box in line with the front of the studs.

    Note

    Two variants of screws are included in the kit from LK, short and long depending on the wall.

    210104_Remote_wall_int_installation_2.eps

    x4

    Pan head stainless steel screw

  6. Cover the screw heads with the provided LKS plugs.

    210701_LKS_Plugs.eps

    x4

    LKS Plug