Skip to main content

Installation

Install Orbital Shower Core
240320_R3_Shower_Unit_core_Hose_kit_comp_overview.eps
  1. Remove the transport plugs before starting the installation.

    210629_R3_Remove_transport_plug.eps
  2. Insert the Core into the Top and Bottom Bracket Assembly, and secure the safety wire.

    Caution

    • Heavy equipment. Orbital Shower Core weighs approx. 25 kg

    • Make sure that hoses and cables do not get pinched.

    210524_Remote_core_installation.eps
  3. Connect the power cable to the junction box.

    210505_Remote_Electrical_installation.eps
  4. Connect the antenna cable to the Wi-Fi antenna.

    210505_R3_Remote_Complete_installed_-_R3_rotate_core_Install_wifi_cable.eps
  5. Cut the recirculation hose and flush hose.

    210517_Remote_core_cut_hoses.eps
  6. Apply fitting grease to the separate hose coupling, push all the way into the circulation hose and tighten with the hose clamp.

    210507_Install_shower_Unit_Recirc_hose_barbed_nozzle.eps
  7. 240305_R3_shower_unit_connect_hoses.eps
  8. Figure 115. Only valid for Orbital ethernet installation
    Only valid for Orbital ethernet installation


    Pull the ethernet cable through the cable connector and attach the RJ45 connector.

    220505_Standard_Install_Ethernet_cord.eps
  9. Unscrew the protective cover.

    220505_Install_Ethernet_remove_lid.eps
  10. Hand tighten the cable connectors to avoid damage.

    220503_Panel_Install_Ethernet_cord_connect.eps