Important installation steps
Read the following instructions carefully. The number is used as a reference in the installation steps where the instruction is applicable.
1
For installation in Sweden, carry out the installation according to the current industry regulations Säker Vatten:
A waste water pipeline shall be laid with falls along the entire length of the pipeline.
Wastewater pipes must be installed with regard to the movements that can be expected during the construction period and during operation. Fasteners for cables must be mounted and placed according to the supplier's installation instructions. A fastening device must be placed no more than 200 mm from the floor drain.
On pipes that are to be cast in, fastening devices are placed according to the supplier's installation instructions, alternatively at all branch pipes, sockets, bends, deposits and on straight sections to a sufficient extent to prevent the pipe's position from changing.