Skip to main content

Installation

Prepare Orbital Systems shower head
220223_prepare_shower_head_comp_overview.eps

  1. Measure and mark the placement of the wallbox UNI Push. Mount the wallbox with four screws from the front, and follow the provided instructions. Installation should be performed according to industry rules.

    210324_Standard_install_head_shower_millimeter.eps

    x4

    Pan head stainless steel screw

  2. Make sure that the support sleeve is inserted into the pipe and that the pipe is fully inserted, and past the o-ring, into the wallbox UNI Push.

    191109_R3_pre_inst_angle_wall_box.eps
    210628_R3_pre_inst_angle_wall_box.eps

    Wallbox UNI Push with external support sleeve

    Wallbox UNI Push with integrated support sleeve