Shower Installation Overview

The image is a principle sketch, and should not be used as an installation scenario.

The Wall Box must also be equipped with a leakage indicator.

Drain unit HxWxD: 192x812x184 mm

Drain connection: Ø75 mm

Available shower variants:
A: Orbital Systems shower head & hand shower
B: Orbital Systems shower head
C: Third-party shower head & hand shower *

. * The following requirements are applicable when choosing third-party components. Contact Orbital Support for more detailed information.

Shower heads and diverters used with the Orbital Shower shall not have any flow restrictors.
Shower heads and diverters used with the Orbital Shower should have as low back pressure as possible. Too much back pressure will result in weaker shower water flow, shorter filter lifespan and a higher pump sound.
Preferably the shower heads and diverter individually have less than 1 bar back pressure at 12 litres/min water flow, and less than 0.7 bars at 10 litres/min.
Orbital Systems recommends using diverters designed for wall integration that don't close the water path when switching between outlets. In other words, if the shower is running and the diverter is positioned between the two outlets, the water should still pour out of both of those outlets.

Installation