Skip to main content

Orbital Service Handbook

15. Funnel

This instruction shows how to swap the Funnel. Follow the instructions in detail, and don't hesitate to reach out if you have any questions - support@orbital-systems.com.

Use the kit below to swap the Funnel.

Table 70. 1-04-0186 - Swap Funnel kit:

Funnel



Procedure. Replace Funnel
  1. Lift up the grate.

    240312-Remove_grid.eps
  2. Lift up the Funnel.

    240312-Remove_Funnel.eps
  3. Clean the Sensor Tank.

    240312-Clean_Sensor_tank.eps
  4. Place the new Funnel in the drain unit.

    Caution

    The Funnel should be placed with the hole to the left. If the Funnel is placed with the hole to the right, the water will not recirculate.

    240312-Insert_Funnel.eps
  5. Place the grate back in place.

    240312-Insert_grid.eps
  6. Complete and submit the service report (found in the service request).

  7. Recycle the replaced Funnel. 240516-Recycling.eps