16. Funnel
This instruction shows how to swap the Funnel. Follow the instructions in detail, and don't hesitate to reach out if you have any questions - support@orbital-systems.com.
Use the kit below to swap the Funnel.
Table 73. 1-04-0186 - Swap Funnel kit:
Funnel |
Procedure. Replace Funnel
Lift up the grate.
Lift up the Funnel.
Clean the Sensor Tank.
Place the new Funnel in the drain unit.
Caution
The Funnel should be placed with the hole to the left. If the Funnel is placed with the hole to the right, the water will not recirculate.
Place the grate back in place.
Complete and submit the service report (found in the service request).
Recycle the replaced Funnel.
