Skip to main content

User Guide

Change the Filter Capsule

Needed consumable: Filter Capsule

  • Filter Capsule Model No: OS C1050085A10

  • Use only Orbital Systems Filter Capsule OS C1050085A10 in the shower system

  • Spare Part Reference: 1-05-0496 Filter Capsule

Icon shown on Control Dial screen when Filter Capsule change is needed:

210322_maintenance_icon_change_filter_capsule.eps
Figure 19. Access the Wall Box

Hatch Panel

Use the magnetic key to open the door. However, it is only needed if the door lock has been installed and activated.

Hatch LK & Hatch Cabinet

Use a screwdriver or similar to unlock the door.

Hatch Tiled

Press the upper left corner to tilt the door open. Then, lift the door off the lower brackets.

Caution

The weight of the Hatch Tiled door is approximately 8-12 kg, depending on the tile thickness. Be careful when lifting.

Access the Wall Box
Access the Wall Box
Access the Wall Box

Hatch Panel

Hatch LK & Hatch Cabinet

Hatch Tiled



  1. Open the filter hatch on the Core.

    230609_Open_Door_Filter.eps

  2. Release the filter holder.

    240315-Open_filter_hatch.eps

  3. Remove the Filter Capsule.

    240315-Remove_filter.eps

  4. Insert the new Filter Capsule and close the hatch.

    Risk of leakage

    Make sure the Filter Capsule is inserted all the way in, or leakage may occur.

    240315-Insert_filter.eps

  5. Close the filter holder and hatch on the Core.

    240315-Close_filter_hatch.eps