Skip to main content

User Guide

Pair your device with Orbital Audio

Orbital Audio is an optional add-on product, and the following instructions are valid if your shower is installed with Audio.

You will find the name and PIN of your Orbital Audio on the amplifier. The placement of the amplifier depends on your installation model. For Basic, the amplifier is mounted on the wall next to the Core. For all other models, you find the amplifier mounted in the top left corner, inside the Wall Box.

Figure 18. Access the Wall Box

Hatch Panel

Use the magnetic key to open the door. However, it is only needed if the door lock has been installed and activated.

Hatch LK & Hatch Cabinet

Use a screwdriver or similar to unlock the door.

Hatch Tiled

Press the upper left corner to tilt the door open. Then, lift the door off the lower brackets.

Caution

The weight of the Hatch Tiled door is approximately 8-12 kg, depending on the tile thickness. Be careful when lifting.

Access the Wall Box
Access the Wall Box
Access the Wall Box

Hatch Panel

Hatch LK & Hatch Cabinet

Hatch Tiled



  1. Check the name and PIN on the amplifier.

    230822-Name_and_PIN_Amplifier.eps

  2. Go to the Bluetooth settings in your device, and select your Orbital Audio in the list.

  3. Enter the PIN. This is only needed the first time you pair your device.

  4. Play music from your paired device.

Note

Depending on which variant of Orbital Audio is installed, you can either pair up to eight devices (typically residential installations) or one device at a time (typically hotel installations). When the pairing list is full, you will need the PIN to pair another device.