Hatch LK
- . Installation scenario
Hatch Cabinet can be installed in a room with or without a waterproof floor. This installation requires new construction or renovation. More details regarding the installation can be found in the installation manuals.
The Core (shower unit) can be placed within three meters of the shower area.
There can be a maximum of three bends (6x45°).
The stud depth in the shower area must be a minimum of 90 mm and at the Core a minimum of 145 mm.
The Core cannot be placed more than three meters from the shower area.
There cannot be more than three bends (6x45°) between the shower area and the Core.
The pipe routing cannot go around a door.
All measurements are given in millimetres (mm).
* The supplied water trap meets the European standard EN1253-1 and can be used for buildings of any height. If the building has one ground floor and up to three floors above it, you can use a water trap designed for shorter buildings that follow standards EN1253-6 and EN1253-7. Good options include the Unidrain 1417 or Unidrain 1415 models.