- User Guide
- Orbital Shower
- User Guide: Swipe interface
- Maintenance Overview & Notifications
Maintenance Overview & Notifications
Maintenance procedure | When to perform | Estimated time to perform | Consumables needed | |
|---|---|---|---|---|
Change the Filter Capsule - See Chapter Change the Filter Capsule for detailed procedure instructions. | When notified by the system. On average the Filter needs to be changed every three months (assuming one shower session per day). | ~15 s | Filter Capsule: included in the Care Plan. | |
Descale - See Chapter Descale for detailed procedure instructions. | When notified by the system. Frequency depends on your water hardness setting; by default about once every three weeks (assuming one shower session per day). Optimise the descaling intervals for your water hardness by going to Shower settings → Adaptive descaling in the My Water app. | ~15 s | Descaling Tablet: included in the Care Plan. | |
Clean the drain - See Chapter Clean the drain for detailed procedure instructions. | Once a month, or sooner if notified by the system. | ~3 min | ||
Low UV level - See Chapter Low UV level for more information. | When notified by the system, which is typically very rare. The frequency depends on the contamination load and water hardness. | |||
Lost internet connection | Indicates that the shower can not connect to the internet. Troubleshoot your connection and check your network settings. |



