Third-party components
When choosing third-party shower heads and diverters for Orbital shower, the following requirements need to be fulfilled:
Shower heads and diverters used with the Orbital Shower shall not have any flow restrictors.
Shower heads and diverters used with the Orbital Shower should have as low back pressure as possible. Too much back pressure will result in weaker shower water flow, shorter filter lifespan and a higher pump sound.
Preferably the shower heads and diverter individually have less than 1 bar back pressure at 12 litres/min water flow, and less than 0,7 bars at 10 litres/min.
Orbital Systems recommends using diverters designed for wall-integration that don't close the water path when switching between outlets. In other words if the shower is running and the diverter is positioned in between two outlets, water should still be pouring out of both of those outlets.