Installation Model: Hatch
 |
Installation scenario: In a room with or without a waterproof floor. This installation requires new construction or renovation.
More details regarding the installation can be found in the installation manuals, found here.
Installation measurements:
Figure 8. Possible placement:
Maximum three meters between the Core and the shower zone.
Maximum three bends (6x45°).
Any bends in the sleeves and conduits must be achieved using 45° angles. To achieve a 90° bend, two 45° bends need to be used.
Minimum 90 mm stud depth in the shower area, minimum 145 mm at the Core.
Figure 9. Not possible placement: 
|