Skip to main content

Orbital Shower Installation

Install Wall Box
210304_Remote_Cabinet_install_comp_overview.eps

  1. Punch out one hole in the sheet metal on the back of the Wall Box.

    210701_Remote_Cabinet_wall-mounted_inlet_holes_overview.eps
    Figure 64. Only valid for Orbital Audio

    Punch out holes in the perforated plate for the exciter cable.

    Only valid for Orbital Audio


  2. 210118_Remote_Cabinet_wall_mount_cut_cone_millimeter.eps
  3. 210118_Remote_Cabinet_wall_mount_cut_drain_cone_millimeter.eps

  4. The weight of the Shower Core is approx. 25 kg. The wall construction must be able to support this load.

    210314_Remote_Cabinet_wall_mounting_millimeter.eps

  5. Note

    Two variants of screws are included in the kit from LK, short and long depending on the wall.

    210201_Remote_wall_mounted_installation_2.eps

    x4

    Pan head stainless steel screw

  6. Use the LKS plugs supplied with the Wall Box to hide the screw heads.

    240220_Cabinet_LKS_Plugs_.eps

    x4

    LKS Plug