Technical specification
General performance | |
Savings rate: | Up to 100% water savings of water used in sink |
Size and weight | |
Tank: | 440 x 270 x 65 mm, 1.2 kg |
Pump: | 197 x 296 x 140 mm, 3.5 kg |
AC/DC power supply: | 152 x 63 x 30 mm, 420 g |
Water supply | |
Incoming Cold water: | Recommended flow: 5-8 l/min Recommended incoming water pressure: 2-5 bar Maximum working pressure: PN10 |
Water connections (Tank and Pump): | G 1/2 threads (ISO 228/1-G 1/2” external threads) and G 3/8 threads (ISO 228/1-G 3/8” external threads) |
Water hardness: | 3°dH-14°dH. If the local water hardness on the installation site is more than 14dH it is recommended to install a water softener. |
Recommended power supply | |
100-240V, 50/60Hz, 2.5A, 120W | Power consumption: Tank and Pump unit; active mode: nominal 25W, max. 70W; standby mode: 0.21W |
Installation area | |
Full system: | All components are wall mounted: behind commode, below wash basin or up to 3 m from the wash basin. The top inlet in the Tank needs to be placed at a lower point than the outlet from the wash basin. The Pump needs to be placed within 6 m from the toilet cistern. |
Maintenance | |
Cleaning tablet: | Add in the sink at regular intervals to both clean the product and get a fresher bathroom experience. The frequency depends on usage and preference. |
Fresh Mesh: | Cleaned by hand, in a dishwasher, or replaced when needed. The frequency depends on usage; typically once per month. It’s important that the Fresh Mesh is not emptied and cleaned in the wash basin. |