Install Orbital Shower Core
 |
Cut the recirculation hose and flush hose.
Remove transport plugs before installation.
Cut pipes.
Caution
Install hose connections according to industry rules.
Make sure to flush out the water lines from debris before connecting the Core.
Insert Orbital Shower Core into the Core Cabinet and attach the Safety Wire. Keep tilted to enable electrical installation.
Caution
Heavy equipment. Orbital Shower Core weighs approx. 25 kg.
Make sure Hoses and Cables are not pinched.
Connect the Wifi Antenna Cable.
Connect incoming and outgoing water to the Core.
- Figure 70. Only valid for Orbital Ethernet installation
Pull Ethernet cable through the cable connector and attach the RJ45 connector.
Hand tighten cable connectors to avoid damage.
