Skip to main content

Orbital Shower Installation

Pipes & connections in the Wall Box
  1. 210315_Remote_Cabinet_wall_mount_pipe_in_drain_cone_millimeter.eps
  2. 210120_Remote_Cabinet_Wall_mount_pipes_and_connection_cut_corr.eps
  3. 210120_Remote_Cabinet_Wall_mount_pipes_and_connection_cut_hoses_millimeter.eps
  4. 230419_Panel_Drainage_bend_kit_comp_overview.eps

    Connect the bellows sleeve to the Wall Box drain outlet and to the pipe from the drain bend.

    240326-Drainage_Below_Sleeve_Cabinet.eps

  5. Warning

    Electrical installation should be performed according to industry rules by a competent electrician.

    211103_Cabinet_connect_electrical.eps
  6. 210630_Remote_Wall-mount_Wifi_antenna_overview.eps
    230906_Cabinet_R3_Install_wifi_antenna.eps
  7. Figure 65. Only valid for Orbital Audio installation
    Only valid for Orbital Audio installation


    Caution

    Use the supplied rubber plug.

    230626_Cabinet_Exciter_to_wallbox-2.eps

  8. Strip the speaker cable and attach it to the amplifier.

    230608_Connect_Exciter_to_Amplifier-2.eps

  9. Connect the extension cable to the puck antenna.

    230628_Connect_Cable_to_puck_antenna.eps

  10. Punch out one hole in the sheet metal. Remove the stub antenna from the amplifier, and replace it with the puck antenna.

    230619_Cabinet_Connect_Antenna_to_Amplifier.eps

  11. Mount the amplifier in the Wall Box by loosening the nut from the lower bracket and threading the amplifier into the upper bracket. Attach the lower nut and tighten.

    230622_Cabinet_Mount_amplifier_to_wallbox.eps

Fixture Installation completed.

The next step is to install the Orbital Shower Core, Control Dial, shower head, and hand shower (including the diverter and hand shower holder). See the Technology Installation Manual for details.

210325_Remote_Cabinet_wall_mount_pre_inst_completed.eps