Orbital Shower Installation Options
The distance between the center of the Orbital Shower Core and the center of the drain unit must not exceed 3000 mm.
When installing the Orbital Shower Hatch Cabinet model, the Orbital Shower Core is installed as surface-mounted wall mounting outside the shower area "in the bathroom with waterproofing in the floor" or in an adjacent room "without waterproofing in the floor." The kit only allows for mounting on a wall. The leakage indicator should end "in rooms with a waterproof floor". Read about the leakage indicator in Install drainage pipe. The limitation in the distance, ensuring full system functionality, is a maximum of 3000 mm.
Any bends in the sleeves and conduits going to and from the Orbital Shower Core must be achieved using 45° angles. For example, to achieve a 90° bend, two 45° bends need to be used. When installing the Orbital Shower, no more than six 45° bends (a maximum of three 90° bends) can be used in total. These limitations apply to both horizontal and vertical bends.
 |