Wall Installation
The weight of the Orbital Shower Core is approx. 25 kg. The surrounding structure must be able to support the forces that will stress the attachment points.
Important
Leakage indication shall be placed with a slope along its entire length and end in a room with waterproof floors where you can easily detect a leak. The pipe should not end in place for bathing or showering. Inside diameter of the wire for indication of leakage must be at least 20 mm. The outlet should not be placed near more than 60 mm from the waterproofing layer of the floor or adjacent wall.
The pipe for indication of leakage must be cleaned so that leaking water is not prevented from flowing out. A cabinet must be placed frost-free on the construction warm side inside the plastic foil or the steam brake.
 |