Orbital Shower Installation Options
The distance between the center of the Orbital Shower Core and the center of the Drain Unit must not exceed 3000 mm.
When installing the Basic model, the Orbital Shower Core is installed outside the shower area. The limitation in the distance, ensuring full system functionality, is a maximum of 3000 mm. The kit only allows for mounting on a wall.
Any bends in the sleeves and conduits going to and from Orbital Shower Core must be achieved using 45° angles. For example, to achieve a 90° bend, two pcs of 45° bends need to be used. No more than six 45° bends (maximum three 90° bends) can be used in total when installing the Orbital Shower. These limitations apply to both horizontal and vertical bends.
 |