Install Core
Remove the transport plugs before installation.
Insert the Core into the Wall Box and attach the safety wire.
Caution
Heavy equipment. The Core weighs approx. 25 kg.
Make sure to attach the Safety Wire before tilting the Core.
Make sure hoses and cables are not pinched or kinked.
Cut the pipes. Lift the Core out of the Wall Box for better access.
Caution
Install hose connections according to industry rules.
Make sure to flush out the water lines from debris before connecting the Core.
Insert the Core into the Wall Box and attach the safety wire. Keep it tilted to enable electrical installation.
Warning
Electrical installation should be performed according to industry rules by a competent electrician.
x1
M8 socket head
Connect incoming and outgoing water to the Core.
- Figure 19. Only valid for Orbital Ethernet installation
Pull Ethernet cable through the cable connector and attach the RJ45 connector.
Make sure the core is not tilted out, keep it in up-right position.
Hand tighten cable connectors to avoid damage.