Install Orbital Shower Core
 |
Cut the recirculation hose and flush hose according to the measurements below, depending on the installation scenario.
Remove the transport plugs before starting the installation.
Insert the Core into the Wall Box and attach the safety wire. Keep tilted to enable electrical installation.
Caution
Heavy equipment. Orbital Shower Core weighs approx. 25 kg.
Make sure that hoses and cables are not pinched.
Cut the pipes. Lift the Core out of the Wall Box for better access.
Caution
Install hose connections according to industry rules.
Make sure to flush out the water lines from debris before connecting the Core.
Insert the Core into the Wall Box and attach the safety wire. Keep tilted to enable electrical installation.
Caution
Heavy equipment. Orbital Shower Core weighs approx. 25 kg.
Make sure that hoses and cables are not pinched.
Connect the Wi-Fi antenna cable.
Connect incoming and outgoing water to the Core.
Connect the recirculation hose and flush hose to the bottom of the Core.
- Figure 45. Only valid for Orbital ethernet installation
Pull the ethernet cable through the cable connector and attach the RJ45 connector.
Hand tighten the cable connectors to avoid damage.
