Orbital Shower Installation Options
The distance between the center of the Orbital Shower Core and the center of the drain unit must not exceed 3000 mm.
When installing the Hatch LK model, the Orbital Shower Core is installed outside the shower room, with the door opening towards an adjacent room, with a maximum distance, ensuring full system functionality, of 3000 mm. Adjacent rooms do not need to have a waterproofing layer per current industry regulations. The kit only allows for mounting inside a wall.
Any bends in the sleeves and conduits going to and from the Orbital Shower Core must be achieved using 45° angles. For example, to achieve a 90° bend, two 45° bends need to be used. When installing the Orbital Shower, no more than six 45° bends (a maximum of three 90° bends) can be used in total. These limitations apply to both horizontal and vertical bends.
 |