Orbital Shower Installation

Connectivity

Internet connection:

Password protected Wi-Fi 2,4 GHz / 5 GHz or Ethernet.

Electrical Supply

Residual circuit breaker:

One breaker per Orbital Shower Core

Power supply:

One Phase, 230VAC / 50 Hz / 16A *

Mains supply wire:

Min. 2.5 mm² (rated for 16A circuit)

Plumbing / Water

Incoming tap water supply connections:

Separate hot and cold, 2x female G 1/2" swivel nut.

Incoming cold water temp. (min-max):

4-25°C

Incoming hot water temp. (min-max):

50-65°C

Incoming water pressure (min-max):

2-10 bar

The supply pressure is the fundamental requirement for the shower flow:

Recommended water supply flow:

9 litres/minute per inlet hot and cold

Water hardness (min-max):

3°dH-14°dH, or a total hardness of 53-250 mg CaCO₃/litres

Water iron content:

<0,3mg/litre