Skip to main content

Installation

Installing the black or white overhead shower

For the metallic overhead shower, see Installing the metallic overhead shower.

Figure 50. Component Overview
Component Overview


  1. Threaded adapter

  2. Overhead shower arm with gasket

  3. Overhead shower

  1. Cut the Wallbox UNI Push so that it protrudes 6-9 mm. We recommend using the LK Wallbox Cutter UNI.

    201201_Remote_shower_head_inst_1.eps

  2. Fit the threaded adapter into the UNI Push wallbox.

    Notice

    Cover the end of the threaded adapter with thread sealant to avoid leakage.

    201201_Remote_shower_head_inst_molded.eps

  3. Install the overhead shower arm.

    240229_Remote_shower_head_inst_arm.eps

  4. Fit the overhead shower onto the arm.

    Caution

    Make sure the gasket is in place, not to cross thread, and not to overtighten.

    191213_head_shower_install_3.eps